08-01-2021, 07:07 AM
Hi Geoff,
That would work, just use a decent aka 6-8mm wide TyWrap (you can by releasable ones), and then zip up 3 of the brakes up tight, and leave the fourth one slack. This way if you're over enthusiastic with the brake pedal, you don't pop the pistons out on the one you are testing.
Mike
If you want to see a reply to your post your can click the "Subscribe to this thread" and you should be notified at the email address you have in your profile.
That would work, just use a decent aka 6-8mm wide TyWrap (you can by releasable ones), and then zip up 3 of the brakes up tight, and leave the fourth one slack. This way if you're over enthusiastic with the brake pedal, you don't pop the pistons out on the one you are testing.
Mike
If you want to see a reply to your post your can click the "Subscribe to this thread" and you should be notified at the email address you have in your profile.